+ Reply to Thread
Results 1 to 10 of 35

Thread: New Member, yucky pool

Hybrid View

  1. #1
    Join Date
    May 2012
    Location
    Wisconsin
    Posts
    25

    Default Re: New Member, yucky pool

    Thanks for the reply, I've read the muriatic acid how tos and will review them again. That is scary stuff to me. But we've used it before for other stuff.

    But I need to know about how much muriatic acid to use in my pool. I'm unclear on that.

    Also, where should I try to get my stabilizer level at? Because you say you can get too much. Don't want to make things harder. And I only have one test left for CYA.

    PH seems to be creeping slowly higher. Like .2 per day. Why is that? This morning's PH was 7.4 and chlorine was between 3 and 4 with the OTO test.

    Do you have any ideas on why the alk and hardness both tested even higher the 2nd time I did those?

    And if I'm vacuuming calcium dust that should probably go to waste right?

    So, please help me get my pool routine down, I'm so clueless with this. As I said we've screwed it up many years in a row! Should I continue with adding 1/4 bottle bleach each evening? And please tell me how much acid. Thanks so much for helping.
    15' round 4.9K gal AG vinyl pool; bleach; Hayward Perflex EC45 DE filter; Hayward 1HP pump; hrs; HTH 6 way,Will upgrade ASAP; well (very hard water); PF:25

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,208

    Default Re: New Member, yucky pool

    1. You're alkalinity causes the pH to rise over time. This page explains what's going on:
    http://www.poolsolutions.com/gd/lowe...p-by-step.html

    2. I'd recommend starting with a 1/8 - 1/4 gallon dose -- don't measure, guess. That may be too much, but with your TA as high as it is, it will just climb back up. (The good thing about muriatic is that it's really, really unpleasant long before it's really dangerous -- but still, if you don't try to pour and measure, you won't get a snoot-ful)

    3. Do continue with 1/4 bottle of bleach each evening. If your pool's FC gets too high, skip the next dose.

  3. #3
    Join Date
    May 2012
    Location
    Wisconsin
    Posts
    25

    Default Re: New Member, yucky pool

    Hello again. I must say that so far this has been the easiest pool year for us, ever. Thanks for all your help.

    I see there is now a sticky thread on the lime softening. That is what I came in here for. Our ph keeps creeping up and we are getting calcium scaling starting all over the walls. I will print out the directions. Looks rather complicated, so I will need to get more test chems before I do this.

    But other than the hardness problem, we have not had algae, even though we've had an intense heat wave and pounding sun for weeks on end. Thanks so much pool doc! We also have not had to keep changing the DE in the filter. Still using the original and not bumping all the time! It's wonderful!
    15' round 4.9K gal AG vinyl pool; bleach; Hayward Perflex EC45 DE filter; Hayward 1HP pump; hrs; HTH 6 way,Will upgrade ASAP; well (very hard water); PF:25

  4. #4
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,714

    Default Re: New Member, yucky pool

    Glad you're able to enjoy your pool this summer and not spend all your time working on it!!

    Janet

+ Reply to Thread

Similar Threads

  1. New Member - Pool Newbie saying hello
    By rmergen in forum Pool Chemicals & Pool Water Problems
    Replies: 12
    Last Post: 07-16-2013, 09:21 AM
  2. New Member with New pool
    By LarryW in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 08-29-2012, 01:28 PM
  3. New Member - planning new pool
    By GregC in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 04-17-2012, 07:23 PM
  4. new member, new pool
    By dawgster in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 02-08-2012, 06:04 PM
  5. New member and pool owner needs help.
    By mastamoon in forum Dealing with Algae & Slime
    Replies: 3
    Last Post: 09-16-2011, 05:44 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts