+ Reply to Thread
Results 1 to 10 of 35

Thread: New to Forum

Hybrid View

  1. #1
    Join Date
    May 2012
    Location
    New Jersey
    Posts
    21

    Default Re: New to Forum

    Perfect Ben Thanks I followed the forums advise and added a 182 oz jug of bleach last night and will test manually tomorrow because that much would be off the chart on my test kit. This morning I brushed not much kicked up the pool is a paler green. The chlorine level was high on the test 5-10 so some stood in the pool. I took out the cartridge as you suggested Ben and it was pretty filthy. I usually keep several cartridges on hand to switch out. I'll do your soaking method too.Now with running without the cartridge would I miss the opportunity to filter the dead algae out? Now just have to locate stabilizer as Amazon couldn't ship for a week and I have zero in the pool. I might have to break down and go to the pool store. Thanks everyone!
    24' round 13,500 gal AG vinyl pool; Haywood sand filter 1 hp s180t; ; HTH 6 Way OTO Drops; NW NJ

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: New to Forum

    Stabilizer is easier to find, then un-mixed dichlor. As far as we know, nobody is messing around with it, yet.

    However, I just checked the stabilizer a few minutes ago, at Amazon, and it's available for immediate shipment. Now, that may mean it's available in MY area, but not yours. BUT, you might want to try again.

  3. #3
    Join Date
    May 2012
    Location
    New Jersey
    Posts
    21

    Red face Re: New to Forum

    Thanks Everyone,

    I ordered the stabilizer and tsp from Amazon takes 2 days with the prime trial. Now have to find the cartridges guy on Amazon wanted almost as much as the product to ship it . Well heavy rain tonight pool is looking better had zero chlorine again even with 182 oz jug last night. At least it held a little I still was registering high this am but it burned up during the day I'll keep adding 182 oz at night after I brush until the stabilizer comes in or I go broke lol.Once I add the stabilizer how much do you think I'll need if I still have to shock? I'm hoping that once I get the good filters in and have the skimmer sock on it will filter out that algae and turn blue already. Thanks again!!
    24' round 13,500 gal AG vinyl pool; Haywood sand filter 1 hp s180t; ; HTH 6 Way OTO Drops; NW NJ

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: New to Forum

    Do not try to find the cartridges locally -- too many folks are selling the 'identical' cartridge, when it's not 'identical'

    Amazon is out of stock -- of a LOT of pool gear -- and has dropped back to secondary sellers. I would NOT trust those to send you an actual Unicel.

    Just use what you've got, and wait a week and try again, with the link I gave you. Given the fact that your filter was filtering, I'd recommend just putting a new 'B' back in, and using that.

    -- gotta go back and re-read your thread; I'm confusing it with another similar one! --

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts