Low CH can cause damage by leaching calcium out of plaster, concrete, tile, stone, and so forth. You increase CH by adding calcium chloride, sold as deicer at hardware stores, or with calcium hardness increaser sold by the pool store.
Low CH can cause damage by leaching calcium out of plaster, concrete, tile, stone, and so forth. You increase CH by adding calcium chloride, sold as deicer at hardware stores, or with calcium hardness increaser sold by the pool store.
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]
Or, you can use cal-hypo as your source of chlorine for awhile as it will also add calcium at the same time.
Awesome. Thanks so much.
IGVL 22'x40' 33,000 gals w/ Autocover
~Pentair Mechanicals~
Pump: Intelliflo VF
Filter: Triton TR60 w/ ClearPro technology
SWCG: IC40
Heat Pump: UltraTemp 120 Heating & Cooling 125,000/75,000 BTU (Primary)
Heater: 400 BTU Mastertemp (Secondary)
Controls: EasyTouch 8 Ch. w/ load center and built in IC40
You are welcome.
Thanks for the reminder.
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]