When should i add stabilizer?

[Watermom]

Post some current water testing results for us to look at and then somebody here can better advise you. Also, tell us what kind of chlorine you have been using -- ingredients, not just brand names or 'shock.' Lastly, please fill out our pool chart with your pool's info.

Pool Chart Entry Form
Pool Chart Results

Welcome to the Pool Forum!

[thumpzilla]

Im sorry but i will have to do another test on my water .....i dont recall what the numbers were ......but i used liquid sodium hypochlorite at 6.75%

[aylad]

Generally you need to get any messes in a pool cleared up before you add the stabilizer . Whether the cloudiness is from impending algae or something else, we don't know, which is why Watermom asked for test results. I would test for your chlorine at night, then test for chlorine again in the morning before the sun is on the pool. If you lose 1 ppm or less of chlorine overnight, then go ahead and keep adding bleach, but also go ahead and add your stabilizer. If you lose more than 1 ppm of chlorine, then shock the pool and hold it at shock level (12-15 ppm if your CYA is 0) until you can pass that overnight test....and THEN add your stabilizer.

Janet

[PoolDoc]

Sorry your post & membership got lost in the crush; not sure if you still need help, but your membership has been upgraded. -ben