Hey -

I'm in the process of installing my 15x30 AGP.

I started to slowly fill it with water from a hose, had about 8" and the liner popped out on one end.

THe instructions say to put the seam of the liner on the cove. It does not say how much liner to overlap over the side. It's not a jhook liner.

The pool place said they typically put the same of the liner up the wall alittle bit and overlap the liner about 6 inches on a hot day so it'll stretch lots.

I'm guessing they know what they are doing, but why would this happen? The liner is held on by these long U shaped clips, then the top plate.

Any insight is appreciated.

THanks,
Brad