Ok, just looking at your Pool Solutions FAQ about Alkalinity and read:

"My calcium hardness (CH) level is also too low. Can I raise my ALK or TA level and raise my CH level at the same time? Not unless you want to have a pool that looks like it's filled with milk! When you try to add baking soda and calcium chloride (AKA calcium hardness increaser), you almost always end up with a zone where both the ALK and the CH are too HIGH, at least temporarily. And during that brief period the ALK and CH combine to firm fine particles of calcium carbonate (limestone) that cloud your pool."

As I said before, my pool dealer said to wait 6-8 hrs between the 20 lb of each additions (and each of those increments) but I was overzealous and didn't wait more than an hour or two between additions. Based on what I just read, I'm wondering if I have a "limestone cloud". If so, does that change any of your advice?