Oh, yes. Those projects you're gonna get done when you get around to it. I've got some of those. But I still haven't gotten the projects done.
However, I do have a nice round tuit:
Re: Cleaning up algae and water mold in a Intex AG pool after vacation
Oh, yes. Those projects you're gonna get done when you get around to it. I've got some of those. But I still haven't gotten the projects done.
However, I do have a nice round tuit:
Re: Cleaning up algae and water mold in a Intex AG pool after vacation
PoolDoc, thanks for the tip -- after three days the Cl snapped back and the water's crystal clear again.
New numbers:
Free Cl = 5.8
Combined Cl = 0.2
Total Cl (OTO) = 3.0
pH = 7.4
Alkalinity = 120
Cya = 70 +
NaCl = 3000
(The pH dropped to 7.0 when I added cyanuric acid and I bumped it back up with borax)
I'll keep adding bleach for a week like you suggested so I don't have a recurrence (just added an extra pint this morning because I expect a heavy swimmer load for the 4th).
Intex 18' Round 53" Deep AGP, approx 8000 gallons, full sun all day.
Intex 14" Sand Filter Pump, 1600 gal/hour, Intex SWCG Model CS7110.
Re: Cleaning up algae and water mold in a Intex AG pool after vacation
Strat,
Use a 10mL sample when you test instead of a 25mL one. It will make your testing reagents last longer.
Posting Permissions
Reply With Quote