+ Reply to Thread
Results 1 to 10 of 15

Thread: Pool Start Up & Maint

Hybrid View

  1. #1
    Poconos is offline SuperMod Emeritus Whizbang Spinner Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars
    Join Date
    Dec 1969
    Location
    Honesdale PA
    Posts
    1,802

    Default Re: Pool Start Up & Maint

    Within 1 or 2 drops you'll see the shift from green to red. The colors look somewhat faded is the best way to say it but you will see the shift.
    Al

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,244

    Default Re: Pool Start Up & Maint

    If you have none left from last year, you'll need to add some cya. Add enough slowly to the skimmer while the pump is running to get to an initial reading of 30. Then, don't retest, add more or backwash for a week to let it have enough time to dissolve. Until you start to get a cya reading, it is going to be hard to keep any chlorine in the pool. You'll need to test morning and evening and each time add enough to get back to about 5. After cya is in there, you'll be able to just test and dose in the evenings. In a 24 ft AG, one quart of 6% bleach will raise your cl between 1 - 1.5 ppm.

    Hope this helps.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts