+ Reply to Thread
Results 1 to 10 of 46

Thread: 100,000 gal pool

Hybrid View

  1. #1
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: 100,000gal pool

    100,000 gallons is big enough to be different . . . and expensive.

    1. Is this a commercial pool?
    2. What pump and filter do you have? (make / model / size / type)
    3. What sort of chemical feed system do you have?
    4. If it's not commercial, are you committed to operating this thing?

  2. #2
    Join Date
    May 2014
    Location
    So Calif
    Posts
    21

    Default Re: 100,000 gal pool

    Hi, it is not a commercial or public pool. Yes, it would be great to get it going again.

    Pentair DE filter FNS Plus 60
    Pentair Whisperpro pump

    Chemical feed system-chlorine


    Size 260"x260"x272" pool 96" spa

  3. #3
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: 100,000 gal pool

    + 15% chlorine is hard to buy at the consumer level, outside of south Florida. It deteriorates rapidly at summer time temperatures, so IF you get it, you need to make sure it's fresh. I think there may be some places in NJ and California where it's available . . . so you may be able to find it, but that's a local question we often can't help to solve.

    Keep in mind, 15% chlorine is a bit different. For example, it will start a fire if you spill it on a pile of cotton rags!

    + You definitely need a K2006 kit. Especially with a 100K gal pool, you don't want to add unnecessary chemicals. See http://pool9.net/testkits/

    + If the pool does not have really high stabilizer, the best place to start would probably be to get 1 or 2 50lb buckets of dichlor at Sams Club. They are one of the few retailers selling un-diluted dichlor, and at a really good price, too. Dichlor dissolves quickly, so it's easy to add, and it builds up your stabilizer level rapidly. Of course, if your CYA is already too high, that is not a good thing.

    PoolBrand granular dichlor 50lbs @ Sams Club => ~$2.20/lb (May 2014 in Chattanooga)
    PoolBrand dichlor bagged shock 24lbs @ Sams Club => ~$2.50/lb (May 2014 in Chattanooga)

    Kem-Tek dichlor 22 lbs @ Amazon => ~$3.50/lb (May 2014)
    Kem-Tek dichlor 12 lbs @ Amazon => ~$4.10/lb (May 2014)
    Kem-Tek dichlor 5 lbs @ Amazon => ~$5.00/lb (May 2014)
    Kem-Tek dichlor 2 lbs @ Amazon => ~$9.00/lb (May 2014)

    Keep in mind that Amazon products normally ship free; and that in many parts of the country, you will not have to pay sales tax. Shipping + tax can increase the cost from other suppliers by 15 - 40%, so compare delivered cost, not nominal price.

  4. #4
    Join Date
    May 2014
    Location
    So Calif
    Posts
    21

    Default Re: 100,000 gal pool

    Thank you Ben & Carl!

    I ordered the K2006C test kit. It should arrive in 1 week. In the meantime it is very hot here. I have 11 gal 8.25% bleach. No tabs in floaters. Would you recommend having water tested at pool stores or add bleach & tabs until tester arrives?

    From one of the other threads could you clarify running the pump & green water? Did it say don't run the pump if the water is green?

  5. #5
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: 100,000 gal pool

    If you can run the pump, but bypass the filter, do so. Live algae stops up DE filters almost instantly. You have to kill the algae before using the filter.

    Can you get to a Sams Club and get 100# of dichlor?

    There's really no point in adding bleach, till you have enough chlorine on hand to actually deal with the problem: 11 gallons of 8% bleach isn't going to touch what you need to clean up a 100,000 gallon pool. When I had to open neglected 'Olympic size' (75' long, actually, "Short course" pools) that were 120,000 to 200,000 gallons, I normally would add 110 gallons (2 drums) of FRESH 15% bleach.

    If you add chlorine, without adding enough to do the job, you just end up wasting it.

  6. #6
    Join Date
    May 2014
    Location
    So Calif
    Posts
    21

    Default Re: 100,000 gal pool

    The local Sam's Club has dichlor. I'll pick it up later today. Do I just put it all at the deep end?

  7. #7
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: 100,000 gal pool

    Unpainted concrete -- yes. Any other surface -- scatter it. Even with concrete, don't just dump it all in one spot.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts