+ Reply to Thread
Results 1 to 2 of 2

Thread: Semi In Ground Intex 26' Questions

  1. #1
    Join Date
    May 2014
    Location
    texas
    Posts
    1

    Default Semi In Ground Intex 26' Questions

    In south texas,

    have dug hole, put pool in and set up, have approx. 2-3 feet clearance around pool. question regarding retaining walls: do I have to have one, or could I just fill in with sand?

    I plan on building a wood 'box' around the pump/filters, and building a deck around pool.

    Any thoughts, ideas or suggestions? Thanks!

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: Semi In Ground Intex 26' Questions

    . . . membership updated.


    The framework on Intex pools is NOT designed for ground contact; it's just painted steel. I don't believe the tubes are painted on the interior either. You might could get away with direct contact for a year or two -- if you didn't drain the pool -- but probably not longer than that, unless you are in one of the very dry parts of Texas.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts