You are going to need the Taylor K-2006 test kit. As far as I know, it's available online only. There's a link to the Amazon store in Pool Doc's blue signature box.
Re: A quick SWCG question
You are going to need the Taylor K-2006 test kit. As far as I know, it's available online only. There's a link to the Amazon store in Pool Doc's blue signature box.
Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27
Re: A quick SWCG question
Also a link in my signature below.
Re: A quick SWCG question
Well I'll have to order the taylor kit bot for now I got the HTH kit drop kit from walmart and that changed things a lot.
TC is between .5 and 1 PPM
PH is 7.5 (but I was aerating while I went to the store.)
TA is 300
Total Hardness is 340.
What a difference the right tools make.
The SWCG unit I bought produces Chlorine, Ozone and a small amount of copper. My understanding is that with the Ozone you can keep the Chlorine PPM lower. The manual suggests between 1 and 3 PPM. Should I still bring the pool up to 5 PPM first and then start using the unit? Or should I stop at 3?
Posting Permissions
Reply With Quote
