+ Reply to Thread
Results 1 to 10 of 39

Thread: Start up chemistry for first time pool owner

Hybrid View

  1. #1
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,916

    Default Re: Start up chemistry for first time pool owner

    The 7 Day plan calls for bleach while filling and borax if pH is low.

    The Intex pool care plan calls for dichlor and borax. The borax is there to counteract the pH drop caused by dichlor. The dichlor is important as it is the source of CYA in this plan. CYA is critical as it prevents the sun from removing all the chlorine from the pool. Dichlor adds 9ppm CYA for every 10ppm chlorine it adds to the pool and it dissolves quickly.

    I wouldn't use the SWCG until the pool has about 50ppm CYA regardless of when you add the salt. Start the pump/filter as soon as the water is above the in/out ports in the pool.

    The kids can swim anytime the pH is between 7.0 and 8.0 and there is some chlorine in the pool. Add a half a dose of bleach or dichlor before each swim session.

    Do you know the volume of the pool?

  2. #2
    Join Date
    May 2014
    Location
    Lynbrook, NY
    Posts
    75

    Default Re: Start up chemistry for first time pool owner

    BigDave

    According to the Summer Escapes Manual it states approx. 3300 gallons.

    The measurement of the pool is a round pool 14 feet diameter by 42 inches.

  3. #3
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,916

    Default Re: Start up chemistry for first time pool owner

    It'll be eaisier to reckon CYA if you buy dichlor in pound bags, you'll be at about 55ppm CYA after using three pounds (1/2 Cup at a time). Don't even bother testing for CYA until then. At that point, start using the SWCG.

  4. #4
    Join Date
    May 2014
    Location
    Lynbrook, NY
    Posts
    75

    Default Re: Start up chemistry for first time pool owner

    Hi,

    Being im here in NY, we do not have a Sam's club close by, what do you recommend besides Poolbrand Dichlor shock or Kem-Tek. If you swear by them i rather stay on the same boat as everyone else.

  5. #5
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,916

    Default Re: Start up chemistry for first time pool owner

    Leslie's Chlor-Brite has been the good stuff everytime I've looked. It's expensive but since you need very little... Don't let them talk you into anything else - maybe floaty toys.

  6. #6
    Join Date
    May 2014
    Location
    Lynbrook, NY
    Posts
    75

    Default Re: Start up chemistry for first time pool owner

    I found this on Amazon.Com, can you please advise if this is the Pool Brand dichlor. If not I will go and get a one day pass and purchase the one from Sam's Club

    I just ordered my AquaChek Salt Strips and my Taylor K-2006C, I already have the HTH 6 Way Test kit. I just like to have everything in hand before I start anything

    http://www.amazon.com/PoolBrand-Quic.../dp/B0026CG9PK

  7. #7
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,244

    Default Re: Start up chemistry for first time pool owner

    It sure looks like it to me but I cannot read the ingredient list on the packaging. Plus, did you see the price? $32.11 in shipping charges! I would just go to Sam's if it were me.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts