Ok I got the k2006 test kit and finally got the pool tested. Here are my results.

Intex 20x52
9,400 gallons
sand filter with Salt generator

pH 7.4
Alk. 90 ppm
Cal.60 ppm
Cyan. Acid just under 30 ppm
Free Chlo. 9 ppm
Combined Chlo. added the drops to turn back to pick and it wouldn't (maybe very faint)
Temp 72*

I think everything is ok except the chlorine. It's in the middle of a boost cycle right now because we have been getting lots of rain but it's really low, I can smell it but not sure what to do to get it up.
Also it's really cold because we get down in the 50s at night, I have a solar blanket and a solar panel on it but we are now trying to add hot water from the tap. Please let me know what you think and what I should do to adjust. Thanks