Very Cloudy/Foaming issues

[CarlD]

- I did the DE test, but with my pool water already a bit cloudy it was a bit difficult to see, but not impossible. From my vantage point there was not any amount of white-ish water shooting out of my return that was any worse then the cloudy water already being put back in rotation. After adding the DE, i did notice my pressure go up by 2 lbs. Based on the other post you had me reference, this is 1 lb more then i would have wanted, but still within acceptable range to continue without backwashing. I'll let it go tonight and backwash tomorrow morning.

BigDave: From this above ^^^ it sounds like his filter PASSED the DE test, rather than failed it.

[Apatton]

It's tough to say since it is kicking out white debris as is. You're right, acid made no difference. I'll work to get you the figures from your previous response. I'd like to thank everyone for their help, it is immensely appreciated!