+ Reply to Thread
Results 1 to 10 of 114

Thread: Chlorine Lock ?

Hybrid View

  1. #1
    Join Date
    Jul 2014
    Location
    SC
    Posts
    49

    Default Re: Chlorine Lock ?

    Yes. 1st time I testedi gor 100. Tested again and tried to be so careful with that litle black dot...then about 80. Not diluted. We have been adding bleach 2x's per day, morning and night in the amouts that will bring it up to 25ppm. My son took over the testing for me as I became frustrated not knowing if I was doing it correctly. Watermom said to get the FC to 25ppm and get it to hold overnight and then for good measure keep it at that level for another day and then start backing off with the goal of maintaining 8-15ppm. I hope I am understanding this correctly. I will say that my pool looks sparkling and clear but I also understand this will be short-lived if I do not stick with the program. It needs a good vac but these 101 degree days are miserable! Thank you for your continued advice and support!
    23k gal vinyl IG rectangular pool, Hayward 1hp pump; Pentair top mount sand filter, 8hr on time, chlorine feeder, K2006. PF=5

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: Chlorine Lock ?

    Quote Originally Posted by mjsboone View Post
    It needs a good vac but these 101 degree days are miserable!
    When it's 101, you need to be sure you are wearing the correct attire: sunscreen. Whether other attire (besides sunscreen) is needed depends on how high your fence is, and where the neighbors are located. Frequent in-pool inspections to make sure the the debris is adequately being removed, are also recommended. You'll be amazed how much more pleasant this task is, if you are properly dressed, and follow the proper inspection process.


  3. #3
    Join Date
    Jul 2014
    Location
    SC
    Posts
    49

    Default Re: Chlorine Lock ?

    Sunscreen a must. Other attire optional after dark.
    23k gal vinyl IG rectangular pool, Hayward 1hp pump; Pentair top mount sand filter, 8hr on time, chlorine feeder, K2006. PF=5

  4. #4
    Join Date
    Jun 2014
    Location
    New Jersey
    Posts
    82

    Default Re: Chlorine Lock ?

    Quote Originally Posted by mjsboone View Post
    Yes. 1st time I testedi gor 100. Tested again and tried to be so careful with that litle black dot...then about 80. Not diluted. We have been adding bleach 2x's per day, morning and night in the amouts that will bring it up to 25ppm. My son took over the testing for me as I became frustrated not knowing if I was doing it correctly. Watermom said to get the FC to 25ppm and get it to hold overnight and then for good measure keep it at that level for another day and then start backing off with the goal of maintaining 8-15ppm. I hope I am understanding this correctly. I will say that my pool looks sparkling and clear but I also understand this will be short-lived if I do not stick with the program. It needs a good vac but these 101 degree days are miserable! Thank you for your continued advice and support!
    1st... Congrats on seeing the pool sparkle!!! To me, it's like the pool is smiling back

    Just a couple things to consider... You said, "I am smelling that chlorine smell for the first time in a very long time". That smell, if still there, may be an indication your shock time is not yet over. PoolDoc can correct me, but I believe that could mean there is something in your pool binding with free chlorine to make chloramine. It's the chloramine that is what you are actually smelling. Have you done the combined chlorine (CC) test after testing for the FC? Ideally, you want that reading to be zero and that will also confirm your shock treatment was successful. When your pool is clear and doesn't smell, you know your in cruise mode.

    At 80 CYA, you're gonna need extra testing R-0871 reagent. Buy the 2oz bottles instead of the 0.75oz. Consider draining the pool a little at a time to get that number down. Then by next season opening, you'll wanna be back down to about 50.

    Enjoy
    19.5k gal, 16x32 vinyl liner, sand filter, 1hp single speed pump, K-2006 test kit. PF=6

  5. #5
    Join Date
    Jul 2014
    Location
    SC
    Posts
    49

    Default Re: Chlorine Lock ?

    I do not believe the shock time is over yet either according to my numbers (which I cannot tell you with certainty what they are right now-my son is not home) however, your comment regarding my smelling chlorine faintly for the first time had me worried. I have been out around my pool this afternoon sniffing away trying to smell chlorine which I am proud to report, I smelled nothing! I believe that I must have been smelling the remnants of the bleach bottles! Yesterday, when I started to panic about running out of reagent, which we did this morning, I ordered another bottle without even looking at the ounces. I just do not want to lose ground because I cannot test for another day or two. Ugh!
    23k gal vinyl IG rectangular pool, Hayward 1hp pump; Pentair top mount sand filter, 8hr on time, chlorine feeder, K2006. PF=5

  6. #6
    Join Date
    Jun 2014
    Location
    New Jersey
    Posts
    82

    Default Re: Chlorine Lock ?

    Don't be worried so much. A slight smell isn't worth stressing over. A strong smell is a warning sign.

    I ran out of reagent myself for about 5 days earlier this month. I test every day. I just kept adding my typical 1/3rd of 121oz 8.25% each day. Next test after getting my package shipment was right where I expected.

    If you order again, use the Amazon store here and the forum will get a small piece of the sale.

    http://poolforum.com/amz/
    19.5k gal, 16x32 vinyl liner, sand filter, 1hp single speed pump, K-2006 test kit. PF=6

  7. #7
    Join Date
    Jul 2014
    Location
    SC
    Posts
    49

    Default Re: Chlorine Lock ?

    I did order through Amazon link on website.
    23k gal vinyl IG rectangular pool, Hayward 1hp pump; Pentair top mount sand filter, 8hr on time, chlorine feeder, K2006. PF=5

  8. #8
    Join Date
    Jun 2014
    Location
    New Jersey
    Posts
    82

    Default Re: Chlorine Lock ?

    19.5k gal, 16x32 vinyl liner, sand filter, 1hp single speed pump, K-2006 test kit. PF=6

  9. #9
    Join Date
    Jul 2014
    Location
    SC
    Posts
    49

    Default Re: Chlorine Lock ?

    Yikes! Pool experts, I believe I have screwed up my pool even worse! Received new bottle of reagent this afternoon and tested tonight. My numbers...FC 36, CC 7. I kept putting bleach in morning and night for the past 3 days hoping I would keep up the progress we were making in the numbers. I far surpassed the 25ppm I was shooting for. And went way up in CC also. Pool is not quite as clear as it was a few days ago and saw some algae on bottom-not a lot. Looking for some guidance please. Did the supposed chlorine lock break and,even worse, did I keep adding when I should not have.? I starting to freak out again!
    23k gal vinyl IG rectangular pool, Hayward 1hp pump; Pentair top mount sand filter, 8hr on time, chlorine feeder, K2006. PF=5

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts